Brand HONGSEN brass CR type check valve 1/2 SEA for wildly use
• Ensure one flow direction and avoid reversal.
• With the built-in damper and could be mounted on the piping with pressure pulsation.
• Prevent refrigerant back flow from high temperature evaporator to low temperature evaporator.·
• Applicable to the refrigeration unit in parallel with compressor.
• Both direct flow type and right-angle type are available.
• Model CV check valve is used on the piping of liquid, suction gas or hot air on thefreezing, cold storage and air conditioner units.
• The valve seat and seals of Model CV check valve have excellent sealing performance.
• For Model CV check valve, both threaded and welded connections are available.
ModelCV-6 | Type | SPEC | I.D mm | KV VALUE ( m³/h) | |
Flare | Soldering | ||||
CV-6 | Direct Flow | 1/4 SEA | 1/4 ODF | 4.8 | 0.56 |
CV-10 | 3/8 SEA | 3/8 ODF | 8 | 1.43 | |
CV-12 | 1/2 SEA | 1/2 ODF | 10 | 2.05 | |
CV-16 | 5/8 SEA | 5/8 ODF | 13 | 3.60 | |
CV-19 | 3/4 SEA | 3/4 ODF | 16 | 5.50 | |
CVR-22 | Right Angle | -- | 7/8 ODF | 19 | 8.50 |
CVR-28 | -- | 1 1/8 ODF | 25 | 19.0 | |
CVR-35 | 1 3/8 ODF | 32 | 29.0 |